您的位置: 首 页产品简介脚距为7.5-37.5mm的金属电容MKS 4 page 1

Overview   MKS 4   MKS4-LN   MKM 4   MKP 4

Page 2
Metallized Polyester (PET) Capacitors in PCM 7.5 mm to 37.5 mm
Special Features High volume/capacitance ratio Self-healing According to RoHS 2002/95/EC Typical Applications For general DC-applications e.g. By-pass Blocking Coupling and decoupling Timing Construction Dielectric: Polyethylene-terephthalate (PET) film Capacitor electrodes: Vacuum-deposited Internal construction: Encapsulation: Solvent-resistant, flame retardent plastic case with epoxy resin seal, UL 94 V-0 Terminations: Tinned wire Marking: Colour: Red. Marking: Black. Epoxy resin seal: Red		Electrical Data Capacitance range: 1000 pF to 220 μF (E12-values on request) Rated voltages: 50 VDC, 63VDC, 100VDC, 250VDC, 400VDC, 630VDC, 1000VDC, 1500VDC, 2000VDC Capacitance tolerances: ±20%, ±10%, ±5% Operating temperature range: -55°C to +100°C Test specifications: In accordance with IEC 60384-2 and EN 130400 Climatic test category: 55/100/56 in accordance with IEC Insulation resistance at +20°C: Test voltage: 1.6 Ur, 2 sec Voltage derating: A voltage derating factor of 1.25% per K must be applied from +85°C for DC voltages and from +75°C for AC voltages. Reliability: Operational life > 300000 hours Failure rate < 2 fit (0.5 x Ur and 40°C) Graphs: Soldering: Ur Utest C < 0.33 μF 0.33 μF< C < 220 μF 50 VDC 10 V >5 x 103 M (mean value: 3x104M) > 1500 sec (Mx μF) (mean value: 4500 sec) 63 VDC 50 V >1 x 104 M (mean value: 5x104M) > 3000 sec (Mx μF) (mean value: 6000 sec) 100 VDC 100 V >1.5 x 104 M (mean value: 5x104M) > 5000 sec (Mx μF) (mean value: 15000 sec) >250 VDC 100 V >3 x 104 M (mean value: 1x105M) > 10000 sec (Mx μF) (mean value: 40000 sec) Measuring time: 1 min. Dissipation factors at +20°C: tan at f C < 0.1 μF 0.1 μF< C < 1.0 μF C > 1.0 μF 1 kHz 10 kHz 100 kHz < 8 x10-3 < 15 x10-3 < 30 x10-3 < 8 x10-3 < 15 x10-3 - < 10 x10-3 - - Maximum pulse rise time: for pulses equal to the rated voltage. Capacitance pF/μF Pulse rise time V/μsec max.operation/test 50VDC 63VDC 100VDC 250VDC 400VDC 630VDC 1000VDC 1500VDC 2000VDC 1000 ...6800 0.01 ...0.022 0.033...0.068 0.1...0.22 0.33...0.68 1.0...2.2 3.3...6.8 10...220 - - - 10/100 9/90 6/60 2.5/25 2.5/25 - 30/300 15/150 10/100 9/90 6/60 3/30 2.5/25 - 30/300 15/150 12/120 9/90 5/50 3/30 2.5/25 - 35/350 20/200 15/150 10/100 6/60 6/60 3/30 - 38/380 25/250 15/150 10/100 9/90 6/60 6/60 - 40/400 32/320 17/170 13/130 13/130 9/90 - 70/700 50/500 26/260 20/200 20/200 14/140 12/120 - 90/900 50/500 35/350 35/350 20/200 15/150 - - 100/1000 60/600 40/400 40/400 38/380 - - -       Mechanical Tests   Packing Pull test on leads: d < 0.8 ?: 10 N in direction of leads d > 0.8 ?: 20 N in direction of leads according to IEC 60068-2-21 Vibration: 6 hours at 10...2000 Hz and 0.75mm displacement amplitude or 10g in accordance with IEC 60068-2-6 Low air density: 1kPa = 10 mbar in accordance with IEC 60068-2-13 Bump test: 4000 bumps at 390 m/sec2 in accordance with IEC 60068-2-29   Available taped and reeled up to and including case size 15x26x31.5 / PCM 27.5mm. Detailed taping information: Example for ordering / Part number:
Page 2