WIMA电容
首 页 产品与服务 技术支持 联系我们
Products:
贴片电容
脚距小于2.5mm的电容
脚距为2.5-5mm的电容
脚距为7.5-15mm的薄膜电容
脚距为7.5-52.5mm的金属电容
脉冲电容
防震电容
GTO 电容
RFI 电容
DC-Link电容

您的位置: 首 页产品简介RFI 电容

Overview

 

MKP-X2

 

MKP-X2 R

 

MKP-X1 R

 

MKP-Y2

 

MP3-X2

 

MP3-X1

 

MP3-Y2

 

MP3R-Y2

 
 

RFI 电容

Radio interference suppression capacitors must not only satisfy EMC requirements in suppressing outgoing interference from an application but they must also protect the application from incoming power surges. Hence careful selection of these components is essential.

The special feature of WIMA Polypropylene RFI capacitors are the high capacitance values at smaller case sizes compared to metallized paper capacitors, being available up to 10 µF with AC voltages of 300 VAC, 305 VAC and 440 VAC for class X1, X2 and Y2 . Based on the dielectric used they are highly cost-effective.

WIMA metallized paper are neither actively nor passively flammable. The components are resin impregnated under vacuum and encapsulated with self-extinguishing cast resin. Thanks to the good oxidation behaviour of the paper dielectric, they have outstanding self-healing properties even with high energy pulses. The capacitors are specified for temperatures up to 110° C and are available for class X1, X2 and Y2 applications.

Class X capacitors are connected between phase and neutral or phase and phase conductors. Class Y capacitors have an increased degree of electrical and mechanical safety and are connected, for example, between phase conductors and earthed casing, and thus by-pass operating insulation.

The specified rated AC voltage takes into account a rise of the mains voltage of up to 10% above the nominal value, in accordance with IEC 60384-14.
Copyright © 2003-2007 以上WIMA名称与徽标归WIMA所有 关于WIMA | 联系我们 | 网站地图 | 网站技术支持