Metallized Polypropylene
(PP)
RFI-Capacitors Class X1 with Internal Series Connection
PCM 10 mm to 37.5 mm
Special
Features
Reliable
self-healing Increased corona inception level due to internal series connection High degree of interference
suppression due to good
attenuation and low ESR According to RoHS 2011/65/EU
Typical
Applications
Class X1
RFI applications to meet EMC regulations Capacitors connected to the mains
between phase and neutral or phase
and phase conductors High peak voltage applications, pulse
peak voltage < 4 kV
Construction
Dielectric:
Polypropylene (PP) film Capacitor electrodes: Vacuum-deposited Internal construction:
Encapsulation:
Solvent-resistant, flame-retardent plastic case
with epoxy resin seal, UL 94 V-0 Terminations:
Tinned wire Marking:
Colour: Red. Marking: Black
Electrical Data
Capacitance
range: 1000 pF to 2.2 µF
Rated voltage: 440VAC Continuous DC voltage* (general guide):
< 1000V Capacitance tolerances: ±20%, ±10% (±5% available subject to special enquiry)
Operating temperature range: -55°C to +105°C Climatic test category: 55/105/56 in accordance with IEC
Passive flammability class:
B for capacitors with V > 1750 mm³
C for capacitors with V < 1750 mm³
Insulation resistance at +20°C:
C < 0.33 µF: > 15 x
103 M
C > 0.33 µF: > 5000 sec (MxµF)
Measuring voltage: 100V/1 min.
Dissipation factors at +20°C:
tan
Test specifications:
In accordance with IEC 60384-14
Maximum pulse rise time:
100 V/µsec for pulses equal to a voltage amplitude with x 440VAC = 623V according to IEC 60384-14 Test voltage: C < 1.0 µF: 2260VDC,
2sec
C > 1.0 µF: 1900VDC, 2sec Reliability: Operational life > 300000
hours
Failure rate < 2 fit (0.5 x Ur and
40°C)
Pull test on pins: 10 N in direction of pins according to
IEC 60068-2-21 Vibration:
6 hours at 10...2000Hz and 0.75mm displacement
amplitude or 10g in accordance with IEC 60068-2-6 Low air density:
1kPa = 10 mbar in accordance with IEC 60068-2-13 Bump test:
4000 bumps at 390 m/sec2 in accordance
with IEC 60068-2-29
Available
taped and reeled up to and including case size
15x26x31.5 / PCM 27.5mm.
* If safety-approved EMI suppression capacitors are operated with a DC voltage being above the specified AC voltage rating the given approvals are no longer valid (DIN EN 60384-14).
Furthermore the permissible pulse rise time du/dt (Fmax.) will be subject to a reduction according to
Fmax. = Fr x x UAC / UDC
if the DC operating voltage UDC is higher than x UAC
Reliable
self-healing
due to internal series connection 
x 440VAC = 623V according to IEC 60384-14
