Metallized Polypropylene
(PP)
RFI-Capacitors Class X2 with Internal Series Connection
PCM 15 mm to 48.5 mm
Special
Features
Reliable
self-healing Increased corona inception level due to internal series connection High degree of interference
suppression due to good
attenuation and low ESR According to RoHS 2011/65/EU
Typical
Applications
Class X2
RFI applications to meet EMC regulations Capacitors connected to the mains
between phase and neutral or phase
conductors Installation category II in accordance with
IEC 60664, pulse peak voltage < 2.5 kV
As capacitor voltage divider in applications requiring a high capacitance stability over time
Construction
Dielectric:
Polypropylene (PP) film Capacitor electrodes: Vacuum-deposited Internal construction:
Encapsulation:
Solvent-resistant, flame-retardent plastic case
with epoxy resin seal, UL 94 V-0 Terminations:
Tinned wire Marking:
Colour: Red. Marking: Black
Electrical Data
Capacitance
range: 0.033 µF to 10 µF (E12-values on request)
Rated voltage: 400VAC Continuous DC voltage* (general guide):
< 1000V Capacitance tolerances: ±20%, ±10% (±5% available subject to special enquiry)
Operating temperature range: -55°C to +105°C Climatic test category:
55/105/56 in accordance with
IEC
Passive flammability class:
B for capacitors with V > 1750 mm³
C for capacitors with V < 1750 mm³ Insulation resistance at +20°C:
C < 0.33 µF: > 15 x
103 M
C > 0.33 µF: > 5000 sec (MxµF)
Measuring voltage: 100V/1 min.
Dissipation factors at +20°C:
tan
Test specifications:
In accordance with IEC 60384-14
Maximum pulse rise time:
100 V/µsec for pulses equal to a voltage amplitude with x 400VAC = 565V according to IEC 60384-14 Test voltage: C < 1.0 µF: 2260VDC,
2sec
C > 1.0 µF: 1800VDC, 2sec Reliability: Operational life > 300000
hours
Failure rate < 2 fit (0.5 x Ur and
40°C)
Pull test on pins: 10 N in direction of pins according to
IEC 60068-2-21 Vibration:
6 hours at 10...2000Hz and 0.75mm displacement
amplitude or 10g in accordance with IEC 60068-2-6 Low air density:
1kPa = 10 mbar in accordance with IEC 60068-2-13 Bump test:
4000 bumps at 390 m/sec2 in accordance
with IEC 60068-2-29
Available
taped and reeled up to and including case size
15x26x31.5 / PCM 27.5mm.
Reliable
self-healing
due to internal series connection 
x 400VAC = 565V according to IEC 60384-14