Polyester (PET) Film and
Foil Capacitors for Pulse Applications in PCM 2.5
mm
Special Features
Pulse duty construction PCM 2.5
mm
According to RoHS 2002/95/EC
Typical Applications
For general DC-applications
e.g. Coupling Decoupling
Construction
Dielectric: Polyethylene-terephthalate (PET)
film. Capacitor electrodes: Metal
foil Internal construction:
Encapsulation: Solvent-resistant, flame-retardent plastic case with
epoxy resin seal, UL 94 V-0
Terminations: Tinned
wire Marking: Colour: Red.
Marking: Blue. Epoxy resin seal:
Yellow.
Electrical Data
Capacitance range: 1000
pF to 0.015 μF (E12-values on
request) Rated voltages: 63VDC,
100VDC, 250VDC, 400VDC Capacitance
tolerances: ±20%, ±10%,
±5% Operating temperature
range: -55°C to +100°C Test
specifications: In accordance with IEC
60384-11and EN
130100 Climatic test
category: 55/100/21 in accordance with
IEC Insulation resistance at
+20°C: > 3 x 104 M (mean value: 8 x
105 M) Measuring voltage: Ur = 63V: Utest =
50 V/1 min. Ur > 100V: Utest = 100 V/1
min. Test voltage: 2 Ur, 2
sec Maximum pulse rise time: 1000 V/μsec for pulses equal to the rated voltage
Dissipation
factors at +20°C: tan
at f
C < 0.015
μF
1kHz 10kHz 100kHz
< 7 x
10-3 < 15 x 10-3
< 20 x
10-3
Voltage
derating: A voltage derating factor
of 1.25% per K must be applied from +85°C for DC
voltages and from +75°C for AC
voltages. Reliability: Operational
life > 300000 hours Failure rate < 5 fit
(0.5 x Ur and 40°C)
Pull test on leads: 10 N
in direction of leads according to IEC
60068-2-21 Vibration: 6 hours at
10...2000Hz and 0.75mm displacement amplitude or 10g in
accordance with IEC 60068-2-6 Low air
density: 1kPa = 10 mbar in accordance with
IEC 60068-2-13 Bump test: 4000
bumps at 390 m/sec2 in accordance with IEC
60068-2-29