Polypropylene (PP)
Capacitors for Pulse Applications with Metal Foil
Electrodes, Schoopage Contacts, Double-Sided
Metallization and Self-Healing, Internal Series
Connection for Highest Current Carrying
Capability in
PCM 15 mm to 37.5 mm
Special
Features
Extremely
high pulse duty
Self-healing
Internal series connection
Very low dissipation factor
Negative capacitance change versus
temperature
According to RoHS 2011/65/EU
Typical
Applications
For high
pulse and high frequency applications e.g.
Switch mode power supplies
Converter in drives and power electronics
Deflection systems in monitors
and
TV-sets
Electronic ballasts
Construction
Dielectric:
Polypropylene (PP) film Capacitor electrodes: Aluminium foil and double-sided
metallized plastic film Internal construction:
Encapsulation:
Solvent-resistant, flame-retardent plastic case
with epoxy resin seal, UL 94 V-0 Terminations:
Tinned wire Marking:
Colour: Red. Marking: Black. Epoxy resin seal:
Yellow
Electrical Data
Capacitance
range: 100 pF to 0.22 µF (E12-values on request)
Rated voltages: 400VDC, 630VDC, 1000VDC,
1250VDC, 1600VDC, 2000VDC, 4000VDC,
6000VDC
Capacitance tolerances: ±20%, ±10%, ±5% (other
tolerances are available subject to
special enquiry) Operating temperature range: -55°C to +100°C Climatic test category: 55/100/56 in accordance with IEC
Insulation resistance at +20°C:
C < 0.1 µF: > 1 x 105 M
(mean value: 5 x 105 M)
C > 0.1 µF: > 30000 sec (MxµF)
(mean value: 100000 sec)
Measuring voltage: 100V/1 min. Dissipation factors at
+20°C: tan
Test
voltage: 2 Ur, 2sec / 6 kV: 1.6 Ur, 2sec Dielectric absorption:
0.05% Voltage derating:
A voltage derating factor of 1.35% per K
must be applied from +85°C for DC
voltages and from +75°C for AC voltages. Reliability: Operational life > 300000
hours
Failure rate < 1 fit (0.5 x Ur and
40°C)
Pull test on pins: d < 0.8 Ø: 10 N in direction of pins
d > 0.8 Ø: 20 N in direction of pins
according to IEC 60068-2-21 Vibration:
6 hours at 10...2000Hz and 0.75mm displacement
amplitude or 10g in accordance with IEC 60068-2-6 Low air density:
1kPa = 10 mbar in accordance with IEC 60068-2-13 Bump test:
4000 bumps at 390 m/sec2 in accordance
with IEC 60068-2-29
Available
taped and reeled up to and including case size
15x26x31.5 / PCM 27.5mm.