您的位置: 首 页产品简介脚距为2.5-5mm的电容FKP 2 page 1
|
|
Polypropylene (PP) Film and
Foil
Capacitors
for Pulse Applications
in PCM 5 mm |
|
|
Special
Features |
Pulse
duty construction
Close tolerances up to ±2.5%
(±1%
on request)
Very low dissipation factor
Negative capacitance change
versus
temperature
Very low dielectric absorption
According to RoHS 2011/65/EU |
Typical
Applications |
For high
frequency applications e.g.
Sample and hold
Timing
LC-Filtering
Oscillating circuits
Audio equipment |
Construction |
Dielectric:
Polypropylene (PP) film.
Capacitor electrodes:
Metal foil
Internal construction: |
|
Encapsulation:
Solvent-resistant, flame-retardent plastic case
with epoxy resin seal, UL 94 V-0.
Terminations:
Tinned wire
Marking:
Colour: Red. Marking: Black. Epoxy resin seal:
Yellow. |
|
|
Electrical Data |
Capacitance
range:
33 pF to 0.033 µF
(E12-values on request)
Rated voltages:
63VDC, 100VDC, 250VDC, 400VDC,
630VDC, 800VDC, 1000VDC
Capacitance tolerances:
±20%, ±10%, ±5%, ±2.5% (±2%, ±1.5% or ±1%
available as precision capacitors subject to special enquiry)
Operating temperature range:
-55°C to +100°C
Test specifications:
IIn accordance with IEC 60384-13
Climatic test category:
55/100/56 in accordance with IEC
Insulation resistance at +20°C:
> 5 x 105 M (mean value: 1 x 106 M)
Measuring voltage:
Ur = 63V: Utest = 50 V/1 min.
Ur > 100V: Utest = 100 V/1 min.
Dissipation factors at
+20°C: tan |
|
|
Test
voltage: 2 Ur, 2 sec
Maximum pulse rise time:
1000 V/µsec for pulses equal to the
rated voltage
Dielectric absorption: 0.05%
Temperature coefficient:
-200 x 10-6/°C
(typical)
Voltage derating:
A voltage derating factor of 1.35% per K
must be applied from +85°C for DC
voltages and from +75°C for AC voltages
Reliability:
Operational life > 300000
hours
Failure rate < 5 fit (0.5 x Ur and
40°C)
Graphs:
Soldering: |
|
at f |
C < 1000
µF |
1000 pF < C < 4700 pF |
C > 4700 pF |
1kHz
10kHz
100kHz
1 MHz |
< 3 x 10-4
< 3 x 10-4
< 4 x 10-4
< 10 x 10-4 |
< 4 x 10-4
< 4 x 10-4
< 5 x 10-4
- |
< 4 x 10-4
< 4 x 10-4
-
- |
|
|
Mechanical
Tests |
|
Packing |
Pull test on pins:
10 N in direction of pins according to
IEC 60068-2-21
Vibration:
6 hours at 10...2000Hz and 0.75mm displacement
amplitude or 10g in accordance with IEC 60068-2-6
Low air density:
1kPa = 10 mbar in accordance with IEC 60068-2-13
Bump test:
4000 bumps at 390 m/sec2 in accordance
with IEC 60068-2-29 |
|
Available
taped and reeled.
Detailed taping information:
Example for ordering / Part
number: |
|
|
Page 2 |
|