您的位置: 首 页产品简介脚距为2.5-5mm的电容MKS 2 page 1

Overview   FKS 2   FKM 2   FKP 2   MKS 2   MKS 2-XL   MKM 2   MKP 2

MKI 2

Page 2
Metallized Polyester (PET) Capacitors in PCM 5 mm
Special Features High volume/capacitance ratio Self-healing According to RoHS 2002/95/EC Typical Applications For general DC-applications e.g. By-pass Blocking Coupling and decoupling Timing Construction Dielectric: Polyethylene-terephthalate (PET) film Capacitor electrodes: Vacuum-deposited Internal construction: Encapsulation: Solvent-resistant, flame-retardent plastic case with epoxy resin seal, UL 94 V-0 Terminations: Tinned wire Marking: Colour: Red. Marking: Silver/White. Epoxy resin seal: Red		Electrical Data Capacitance range: 1000 pF to 6.8 μF (E12-values on request) Rated voltages: 16VDC, 50VDC, 63VDC, 100VDC, 250VDC, 400VDC, 630VDC Capacitance tolerances: ±20%, ±10%, ±5% Operating temperature range: -55°C to +100°C Test specifications: In accordance with IEC 60384-2 and EN 130400 Climatic test category: 55/100/21 in accordance with IEC Insulation resistance at +20°C:   Test voltage: 1.6 Ur, 2 sec Voltage derating: A voltage derating factor of 1.25% per K must be applied from +85°C for DC voltages and from +75°C for AC voltages. Reliability: Operational life > 300000 hours Failure rate < 2 fit (0.5 x Ur and 40°C) Graphs: Soldering: Ur Utest C < 0.33 μF 0.33 μF< C < 6.8 μF 16 VDC 10 V >3.75 x 103 M (mean value: 1x104M) > 1000 sec (Mx μF) (mean value: 3000 sec 50 VDC 10 V >5 x 103 M (mean value: 3x104M) > 1000 sec (Mx μF) (mean value: 3000 sec) 63 VDC 50 V >1 x 104 M (mean value: 5x104M) > 1250 sec (Mx μF) (mean value: 3000 sec) >100 VDC 100 V >1.5 x 104 M (mean value: 1x105M) > 3000 sec (Mx μF) (mean value: 6000 sec) Measuring time: 1 min. Dissipation factors at +20°C: tan at f C < 0.1 μF 0.1 μF< C < 1.0 μF C > 1.0 μF 1 kHz 10 kHz 100 kHz < 8 x10-3 < 15 x10-3 < 30 x10-3 < 8 x10-3 < 15 x10-3 - < 10 x10-3 - - Maximum pulse rise time: for pulses equal to the rated voltage Capacitance pF/μF Pulse rise time V/μsec max.operation/test 16VDC 50VDC 63VDC 100VDC 250VDC 400VDC 630VDC 1000 ...6800 0.01 ...0.022 0.033...0.068 0.1...0.47 0.68...1.0 1.5...3.3 4.7 6.8 - - - - - - 4/40 3/30 - - - 10/100 8/80 8/80 5/50 3/30 - 35/350 20/200 15/150 12/120 7.5/75 5/50 3/30 - 35/350 25/250 20/200 15/150 10/100 - - - 50/500 50/500 50/500 25/250 - - - - 80/800 80/800 80/800 - - - - 110/1100 110/1100 90/900 - - - - -       Mechanical Tests   Packing Pull test on leads: 10 N in direction of leads according to IEC 60068-2-21 Vibration: 6 hours at 10...2000 Hz and 0.75mm displacement amplitude or 10g in accordance with IEC 60068-2-6 Low air density: 1kPa = 10 mbar in accordance with IEC 60068-2-13 Bump test: 4000 bumps at 390 m/sec2 in accordance with IEC 60068-2-29   Available taped and reeled. Detailed taping information: Example for ordering / Part number:
Page 2