您的位置: 首 页产品简介脚距为2.5-5mm的电容MKP page 1

Overview   FKS 2   FKP 2   MKS 2   MKP 2   PDF-File

Page 2
Metallized Polypropylene (PP) Capacitors in PCM 5 mm
Special Features High volume/capacitance ratio Self-healing Increased pulse duty from 250VDC rated voltage Very low dissipation factor Negative capacitance change versus temperature Very low dielectric absorption According to RoHS 2011/65/EU Typical Applications For high frequency applications e.g. Sample and hold Timing Oscillating circuits High frequency coupling and decoupling Construction Dielectric: Polypropylene (PP) film Capacitor electrodes: Vacuum-deposited Internal construction: Encapsulation: Solvent-resistant, flame-retardent plastic case with epoxy resin seal, UL 94 V-0 Terminations: Tinned wire Marking: Colour: Red. Marking: Black. Epoxy resin seal: Red.		Electrical Data Capacitance range: 1000 pF to 0.33 µF (E12-values on request) Rated voltages: 63VDC, 100VDC, 250VDC, 400VDC, 630VDC, 1000VDC Capacitance tolerances: ±20%, ±10%, ±5% Operating temperature range: -55°C to +100°C Test specifications: In accordance with IEC 60384-16 Climatic test category: 55/085/56 in accordance with IEC Insulation resistance at +20°C: > 3 x 104 M (mean value: 1 x 105 M) Measuring voltage: Ur = 63V: Utest = 50 V/1 min. Ur > 100V: Utest = 100 V/1 min. Dissipation factors at +20°C: tan   Test voltage: 1.6 Ur, 2 sec Dielectric absorption: 0.05% Voltage derating: A voltage derating factor of 1.35% per K must be applied from +85°C for DC voltages and from +75°C for AC voltages. Reliability: Operational life > 300000 hours Failure rate < 2 fit (0.5 x Ur and 40°C) Graphs: Soldering: at f C < 0.1 µF 0.1 µF < C < 0.33 µF 1kHz 10kHz 100kHz < 0.5 x 10-3 < 0.8 x 10-3 < 3.0 x 10-3 < 0.5 x 10-3 < 0.8 x 10-3 - Maximum pulse rise time: for pulses equal to the rated voltage Capacitance pF/µF max. pulse rise time V/µsec 63VDC 100VDC 250VDC 400VDC 630VDC 1000VDC 1000 ...2200 3300...6800 0.01 ...0.022 0.033...0.068 0.1...0.22 0.33 - - 100 100 100 100 - - 100 100 100 100 - - 250 250 250 250 300 300 300 300 - - 400 400 400 400 - - 500 500 500 - - -   Mechanical Tests   Packing Pull test on pins: 10 N in direction of pins according to IEC 60068-2-21. Vibration: 6 hours at 10...2000Hz and 0.75mm displacement amplitude or 10g in accordance with IEC 60068-2-6 Low air density: 1kPa = 10 mbar in accordance with IEC 60068-2-13 Bump test: 4000 bumps at 390 m/sec2 in accordance with IEC 60068-2-29.   Available taped and reeled. Detailed taping information: Example for ordering / Part number:
Page 2