Polyester (PET) Film and
Foil Capacitors
for Pulse Applications
in PCM 5 mm
Special
Features
Pulse
duty construction
According to RoHS 2011/65/EU
Typical
Applications
For
general DC-applications e.g.
Coupling
Decoupling
Construction
Dielectric:
Polyethylene-terephthalate (PET) film. Capacitor electrodes: Metal foil Internal construction:
Encapsulation:
Solvent-resistant, flame-retardent plastic case
with epoxy resin seal, UL 94 V-0. Terminations:
Tinned wire Marking:
Colour: Red. Marking: Silver. Epoxy resin seal:
Yellow.
Electrical Data
Capacitance range:
1000 pF to 0.047 µF (E12-values on request) Rated voltages:
100VDC, 250VDC, 400VDC Capacitance tolerances:
±20%, ±10%, ±5% Operating temperature range:
-55°C to +100°C Test specifications:
In accordance with IEC 60384-11 Climatic test category:
55/100/56 in accordance with IEC Insulation resistance at +20°C: > 3 x 104 M (mean value: 8 x 105 M)
Measuring voltage:
100 V/1 min. Test voltage: 2 Ur, 2 sec Maximum pulse rise time:
1000 V/µsec for pulses equal to the rated
voltage
Dissipation
factors at +20°C: tan
at f
C < 0.047 µF
1kHz
10kHz
100kHz
< 7 x 10-3 < 15 x 10-3
< 20 x 10-3
Voltage derating:
A voltage derating factor of 1.25% per K
must be applied from +85°C for DC
voltages and from +75°C for AC voltages. Reliability: Operational life > 300000
hours
Failure rate < 5 fit (0.5 x Ur and
40°C)
Pull test on pins: 10 N in direction of pins according to
IEC 60068-2-21 Vibration:
6 hours at 10...2000Hz and 0.75mm displacement
amplitude or 10g in accordance with IEC 60068-2-6 Low air density:
1kPa = 10 mbar in accordance with IEC 60068-2-13 Bump test:
4000 bumps at 390 m/sec2 in accordance
with IEC 60068-2-29