Metallized
Polyphenylene-Sulphide (PPS) Capacitors in PCM 5
mm
Special Features
Operating
temperature
up to
+140°C Self-healing
Low dissipation
factor
Low dielectric
absorption Very constant capacitance value
versus temperature According to RoHS
2002/95/EC
Typical
Applications
For general applications in
high temperature circuits e.g. By-pass
Blocking
Coupling and
decoupling
Timing
Filtering
Oscillating circuits
Construction
Dielectric: Polyphenylene-sulphide (PPS)
film Capacitor
electrodes: Vacuum-deposited Internal
construction:
Encapsulation: Solvent-resistant, flame-retardent plastic case with
epoxy resin seal, UL 94
V-0 Terminations: Tinned
wire Marking: Colour: Red.
Marking: White. Epoxy resin seal:
Red.
Electrical Data
Capacitance
range: 0.01 μF to 1.0 μF
(E12-values on request) Rated
voltages: 63VDC, 100VDC, 250VDC,
400VDC Capacitance
tolerances: ±20%, ±10% (±5% available
subject to special enquiry) Operating
temperature range: -55°C to
+140°C Climatic test
category: 55/140/56 in accordance with
IEC Insulation resistance at
+20°C:
Test voltage:
1.6 Ur, 2 sec
Voltage
derating: A
voltage derating factor of 0.75% per K must be
applied from +125°C for DC voltages and from
+110°C for AC
voltages. Reliability: Operational
life > 300000 hours Failure rate < 2 fit
(0.5 x Ur and 40°C) Graphs:
/ Soldering:
Ur
Utest
C
< 0.33 μF
0.33 μF< C < 1.0
μF
63 VDC
50 V
>1 x 104 M (mean value: 5x104M)
> 3000 sec (Mx μF) (mean
value: 6000 sec)
>100 VDC
100 V
>1 x 104 M (mean value: 5x104M)
-
Measuring time: 1 min. Dissipation
factors at +20°C: tan
at f
C < 0.1 μF
0.1 μF< C < 1.0
μF
1
kHz 10 kHz 100 kHz
< 15
x10-4 < 20 x10-4
< 50
x10-4
< 20 x10-4 < 25 x10-4 -
Maximum pulse rise time: for
pulses equal to the rated voltage
Capacitance μF
Pulse rise time
V/μsec max.operation/test
63VDC
100VDC
250VDC
400VDC
0.01
...0.022 0.033...0.068 0.1...0.47
0.68...1.0
35/350
20/200 15/150 12/120
35/350 20/200 15/150
12/120
50/500
40/400 40/400
-
60/600 50/500 -
Mechanical Tests
Packing
Pull test on
leads: 10 N in direction of leads according
to IEC 60068-2-21 Vibration: 6
hours at 10...2000Hz and 0.75mm displacement amplitude
or 10g in accordance with IEC 60068-2-6 Low
air density: 1kPa = 10 mbar in accordance
with IEC 60068-2-13 Bump
test: 4000 bumps at 390 m/sec2 in
accordance with IEC 60068-2-29
Operating
temperature 
up to
+140°C
