Capacitor
purpose |
Circuit application |
Waveform |
Capacitor electrical
requirements |
WIMA
types |
|
|
|
|
|
Coupling or blocking |
|
|
High insulation resistance. Low self-inductance.
To observe the voltage
rating! |
SMD MKS 02 MKS 2 MKS 2-XL
MKI 2 MKS 4 MKS 4-LN |
|
|
Decoupling or bypassing |
|
|
High insulation
resistance. Low self-inductance. |
SMD FKS 02
MKS 02 FKS 2 MKS 2 MKS 2-XL
MKI 2 FKS 3 MKS 4 MKS 4-LN |
|
|
Timing |
|
|
Stable
capacitance. High insulation resistance. |
FKM 02
FKP 02 FKM 2
FKP 2
MKM 2 MKP 2
MKI 2 FKP 3
MKM 4 MKP 4 |
|
|
Smoothing |
|
|
Comparably high
capacitance. Low dissipation factor (to observe the
frequency). |
SMD MKS 02 MKS 2 MKS 2-XL MKS 4 MKS 4-LN MKP 4 MKP 10 |
|
|
Energy storage / fast
discharge |
|
|
High pulse rise time rating. High
(surge) current carrying capacity.
(please refer to technical data)
|
MKP 2 (>250VDC) MKP 10 FKP 4 FKP 1 SnubberMKP SnubberFKP GTO MKP |
|
|
Sample and hold A-D
converters
Peak voltage detectors |
|
|
Low dielectric
absorption. High insulation resistance. |
FKP 02 FKP 2 MKP 2 FKP 3 MKP 4 |
|
|
RFI suppression |
|
|
Particularly
high reliability against active and passive
flammability. |
MKP-X2 MKP-Y2 MP 3-X2 MP 3-X1 MP 3-Y2 MP 3R-Y2 |
|
|
Voltage dropper |
|
|
Good reliability. Flame
retardent.
(please check if approvals are required)
|
MKP-X2 MP 3-X2
(MP3-X1)
Capacitance range >1.0μF
MKS 4 (>630VDC, >PCM
10) |
|
|
Oscillating |
|
|
Low dissipation factor. Stable
capacitance.
(please refer to technical data)
|
SMD-PPS
FKP 02 FKP 2 MKP 2 (>250VDC) MKI 2
FKP 3 MKP 4 MKP 10 FKP 4 FKP 1 |
|
|
Temperature compensating (compensates for
temperature changes in other components e.g. ferrite
coils) |
|
|
Normally
defined negative temperature characteristic. Sometimes
positive characteristics needed. |
FKP 02 FKP 2 MKP 2 FKP 3 MKP 4 |
|
|
TV fly-back
tuning
(1) |
|
|
Low dissipation
factor. High pulse rise time rating. High dielectric
strength. |
MKP 10 FKP 4 FKP 1 |
|
|
TV
S-correction
(2) |
|
|
Low dissipation
factor. Good pulse rise time rating. |
MKP 4 MKP 10 |
|
|
Snubbing |
|
|
Low dissipation factor. High pulse rise
time rating.
(please refer to technical data)
|
FKP 02 FKP 2 MKP 2 (>250VDC) FKP 3 MKP 10 FKP 4 FKP 1 SnubberMKP SnubberFKP GTO MKP |
|
|
Filtering Pass filter |
|
|
Low dissipation
factor. Stable capacitance. |
SMD-PPS
FKP 02 FKP 2 MKP 2
MKI 2 FKP 3 MKP 4 |
|
|
Filtering Stop filter |
|
|
Low dissipation
factor. Stable capacitance. |
SMD-PPS
FKP 02 FKP 2 MKP 2
MKI 2
FKP 3 MKP 4 |
|